Taken on a small group of Islands in the Oslo fjord, called Hvasser. A 15 meter peice of fabric playing in the wind, scanned right to left in 21 seconds. Got really lucky with the clouds this time, allowing a single beam of sunlight in as a highlight.

  • adam_y@lemmy.world
    link
    fedilink
    English
    arrow-up
    71
    arrow-down
    1
    ·
    edit-2
    5 months ago

    I mean this in the most positive way… I don’t believe you until you can show us how you did it

    The image is lovely, but easily faked. I’ve been taking photographs with weird things for years and I still can’t get my head around this.

    Show and tell and you have my adoration.

    I’ll wait

    Edit:

    "> For sure.

    It’s a canon Lide 30 scanner at its core. You have to remove the light source (a tiny RGB LED) and a pinhole array from the front of the sensor. Then I used a dremel to widen the slit the sensor looks through, to deal with some pretty severe vignetting. The optical assembly is made from foam board, gaffers tape and an acrylic lens liberated from a regular magnifying glass. I use a software called VueScan to perform the actual scan."

    Yeah. That’s pretty cool. Have the adoration you crafty fox.

    • Leavingoldhabits@lemmy.worldOP
      link
      fedilink
      arrow-up
      86
      ·
      5 months ago

      Hey, thanks!

      I get you, the guy at the print-shop I use has asked me several times if my art is artificially generated.

      I don’t know what you expect as evidence, but I’ll try.

      This is a picture from my last exhibition, and the box there is the scanner-camera.

      The fabric is 15 meters by 145cm, I have friends holding it stretched out of frame at both sides.

      This is another shot from the same shoot. I think it’s very dynamic, but I like the ‘sunbeam’ from the original post better.

      And this is a still from a video I took of my friend playing around With the fabric in the wind before she jumped down from the boulder I made her stand on in order to get the original shot.

      I hope that covers it. The wavy pattern is due to the linear sampling of the scanner, and the play of motion over time.

      • RGB3x3@lemmy.world
        link
        fedilink
        English
        arrow-up
        34
        ·
        5 months ago

        Oh man, I thought that wavy pattern was somehow mountains, given that you were at the fjords, not the fabric. This whole image is incredible, fantastically done!

    • dual_sport_dork 🐧🗡️@lemmy.world
      link
      fedilink
      arrow-up
      51
      ·
      5 months ago

      What OP did was produce a functioning scanning back camera out of a pile of junk, which is definitely an achievement that deserves some props.

      These types of mechanisms were more popular in the 90’s and early 2000’s before we’d nailed the ability to produce high resolution image sensors. Using quite rudimentary existing technology you can generate massive high pixel count images provided, of course, that your subject matter has the decency to hold still. These types of things were used widely for high resolution product photography and landscape shots destined to be reprinted in large formats.

    • 667@lemmy.radio
      link
      fedilink
      English
      arrow-up
      9
      arrow-down
      1
      ·
      5 months ago

      I can imagine a focused lens projecting onto a white sheet on the scanner bed, then scanned. Pretty neat imo

    • Leavingoldhabits@lemmy.worldOP
      link
      fedilink
      arrow-up
      35
      ·
      5 months ago

      For sure.

      It’s a canon Lide 30 scanner at its core. You have to remove the light source (a tiny RGB LED) and a pinhole array from the front of the sensor. Then I used a dremel to widen the slit the sensor looks through, to deal with some pretty severe vignetting. The optical assembly is made from foam board, gaffers tape and an acrylic lens liberated from a regular magnifying glass. I use a software called VueScan to perform the actual scan.

      • DigitalNirvana@lemm.ee
        link
        fedilink
        arrow-up
        13
        ·
        5 months ago

        I’ve used and supported VueScan for years. And have a crappy old scanner that I have no other use for. What you did here is amazing. Bravo! I may attempt it some time soon . Super Nifty!

        • Leavingoldhabits@lemmy.worldOP
          link
          fedilink
          arrow-up
          9
          ·
          5 months ago

          Thanks! The build isn’t really that complicated, a Saturday is enough time to make your very own camera.

          Be warned though, I tried to make this with the newer Lide 210 and 220 scanners, and I haven’t gotten them to work right, I think there’s some smart circuits in there that ‘corrects’ away the photographic abilities.

  • Guadin@k.fe.derate.me
    link
    fedilink
    arrow-up
    9
    ·
    5 months ago

    I first thought “what a weird mountains did the scanner produce”. But then I read your text and it makes it even better. This is almost like art, it really makes you investigate and create your own story around it.

    • DigitalNirvana@lemm.ee
      link
      fedilink
      arrow-up
      11
      arrow-down
      1
      ·
      5 months ago

      “Almost like art”, you “kill him with your faint praise.”, to quote some author. lol

      • Guadin@k.fe.derate.me
        link
        fedilink
        arrow-up
        3
        arrow-down
        1
        ·
        5 months ago

        You make it sound so negative, lol . I meant it in a good way. It probably is art, but I’m not knowledgable enough to be the judge of that.

  • Gerudo@lemm.ee
    link
    fedilink
    arrow-up
    8
    ·
    5 months ago

    I’d love to see what your setup looks like and how much trial and error an image takes to make.

    This is unbelievably cool and unique, big plus for using a moving subject.

    • Leavingoldhabits@lemmy.worldOP
      link
      fedilink
      arrow-up
      7
      ·
      5 months ago

      I posted a picture of the camera in response to another comment, it looks a bit unimpressive, but it’s mine and I love it.

      • Vector@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        edit-2
        5 months ago

        It’s anything but unimpressive (the image or the camera!)

        I muck around with astrophotography and have produced some hideous images, that I was ecstatic with because of the effort required to produce them and actually landing a result. And the tangle of wires and mismatched adapters are all part of it, even if it looks like an abomination 😅.

        If anything, I find it super interesting, and it inspires me to give something similar a go!

  • Windows_Error_Noises@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    5 months ago

    Gosh, this is practically audible! It hits some wonderful centers in my brain - your methods, efforts, and the further information you posted give that much more to appreciate. Thank you for sharing!

  • hhhyperfocus@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    5 months ago

    I love your post, I’ve been thinking of ways to capture images from large format lenses, and you inspired me to start experimenting with flatbed scanners.

    I’m using a Canon N 650U because I had one lying around. I haven’t modified it, so the light source still exists.

    I’m genuinely surprised how easy it is to get an image. I experimented by putting the scanner directly under the ceiling light in my kitchen, and I can hold the lens over the flatbed and see the image forming well enough that I can get it into focus. Then just hit the scan button and tada, one image of a ceiling lamp. I didn’t need to dismantle the scanner, or use a gg screen or anything. It just works with the scanner and the lens.

    Since then I’ve rigged up a system to hold the lens in place, and a slider to move it up and down to focus. And I drape a cloth over everything to keep stray light off the sensor.

    Exposure is difficult. My large format lenses don’t have any aperture control, so I either have to build one, or use an ND filter. Or if I don’t have enough light, I add more continuous light sources.

    I saw your comment about vignetting, but I didn’t understand it at the time. I’ve mostly been experimenting with a lens that creates a 100mm image circle, and it works fine. But with another lens, I’ve just tried to scan the entire A4 surface, and the corners are black with a small image in the centre, even though I can peer under the curtain and see a nice bright image from the lens that covers the whole flatbed. I concluded that the sensor will only accept light from one direction, and can’t see light arriving from an angle. So, yeah I’m considering surgery to fix the aperture slit in front of the sensor. I don’t really know what to expect when I open it up. Did you find it easy to remove and modify? Can you offer any advice before I get elbow deep in scanner parts?

    Also, my images all come out in black and white, which is weird. Objects sitting on the glass come out in colour, but the image formed by the lens scans in black and white only.

    The whole rig is too heavy to pick up right now, so I mounted a little mirror on top, so I can point it anywhere, lol.

    • Leavingoldhabits@lemmy.worldOP
      link
      fedilink
      arrow-up
      5
      ·
      edit-2
      5 months ago

      Thank you!

      The n650u looks very similar to the lide 30, so I’ll assume that it’s more or less the same inside.

      The sensor assembly is fairly straightforward. A plastic housing that gets pulled by a cord. Once you liberate the assembly from its track/cord/whatever is holding it and moving it around, you get to the good part.

      The sensor itself, and the RGB LED that supplies the light is on a PCB that’s mounted to the plastic carriage from the underside, it’s held together by plastic tabs (it’s a few years since I did this, so the details might be off, but it wasn’t a difficult task). Use a sharp utility knife to cut the tabs and remove the sensor PCB. I’ve used strips of gaffers tape to put it all together again. The LED looks like a small white rectangle stood perpendicuar to the PCB, I simply broke it off. This makes the canon drivers throw an error, but VueScan doesn’t care. If you’re squeamish about actively destroying your scanner, you can probably figure out a way to cover it up with some tape or foil.

      The circular vignetting you’re seeing is due to the pinhole array, it’s a thin black plastic strip with a bunch of tiny holes set in front of a slit, just rip it off, its either glued or welded in place, but I’ve never had a problem getting it out with some pliers. While you’re messing about in that area, get rid of the prism that spreads the light from LED as well, it probably won’t do much of anything if left in, but it feels better to remove it.

      Once you run the camera in this state, you will discover that you get uneven exposure from edge to edge, a linear vignette perpendicular to the axis which the sensor moves. This happens because the plastic housing of the sensor is throwing shade. So use any available abrasive machine, and cut that housing down to its essential functions of holding the sensor in its place, and as a pressure against the glass plate.

      Unfortunately I don’t have any large format lenses around, so I’ve stuck a magnifying glass to the front of my camera (you know, gotta keep it punk rock), but the way I handle aperture is by cutting holes into black cardboard (very thin cardboard) at about the size I think will work, and taping the hole across the lens. One of my goals with this project is to try make photography into a tactile, direct and intuitive process so I try to avoid unnecessary machinery.

      The reason you’re only getting grayscale is due to how a CIS scanner renders color. During a normal scan, the RGB LED only flashes one channel at a time, and the driver figures out if it’s looking at the red, green or blue signal all by itself, and at the end it interpolates the data to render a full color image file for you to enjoy. I’ve been playing around with the idea of tapping the signal path and use it to trigger an external RGB lighting rig in a studio, to get full color images of models. But so far it’s only a funny thought!

      And lastly, the sensor is exceptionally sensitive to infrared light, to the point that the heat from the internal electronics of the scanner causes streaking. I’m using a few pieces of carefully placed aluminum foil to shield the sensor in select areas, and that reduces the issue to a tolerable amount.

      Good luck on your build! This project has given me a boatload of insights into both photography, electronics and computing, and I hope you will have a similarly awesome journey.

      Edit: im happy to answer any further questions you might have. it would be awesome to see some shots once you get the contraption up and running!

      • hhhyperfocus@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        5 months ago

        Wow, that is all very valuable information, thank you. I feel a lot more confident attempting the surgery on the electronics now.

        I had a thought about going from bw to colour. If should be possible to capture the same scene 3 times, each time with a different colour filter in front of the lens. Then merge the 3 images together as colour channels in Photoshop or similar. The filters will reduce the amount of light picked up by the sensor, which will help a bit on bright sunny days, but will require more light in a studio. Also, in a low light situation, it could be possible to capture a fourth scan with no filter, and use it for brightness information. I’m not exactly sure how to do that, but I know some cellphones use that trick.

        Edit: But I also like your idea of tapping the signal to trigger external lighting.

        • Leavingoldhabits@lemmy.worldOP
          link
          fedilink
          arrow-up
          3
          ·
          5 months ago

          What you are describing is known as a harris shutter, which would be awesome to explore, especially considering the weird way motion is captured on one of these devices.

          I don’t think a separate brightness channel is entirely necessary. But if you want to go down that path, I’d start trying out the blending modes in photoshop. There’s probably also some method for taking your RGB composite, and bring it into a colorspace that has a separate channel for brightness, and then replace that channel with your b/w pass. Lab color space should allow you to do this, although I’m not really sure what software to use, or if theres some way of doing This directly in Photoshop.

          • hhhyperfocus@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            edit-2
            4 months ago

            I have photos to share:

            —=== About the rig ===—

            I’m using the vertical slider from an old enlarging machine to mount the lens on, because it lets me set the focus. I put a sheet of paper on the glass to focus on, then I remove the paper to capture the image. There’s a small gap between the sensor and the glass, so it’s not perfect.

            And since the lens points straight up, there’s a mirror on top which can point to any direction. It looks like a cheap nasty plastic mirror, but the glass is very good quality.

            I’ve looked into modifying the scanner, but it’s very challenging. I got as far a lifting the scanner head off the monorail before just putting it all back together. I’ve since picked up another scanner which I intend to modify. It’s much older, so I won’t feel bad if I accidentally destroy it.

            —=== About lenses ===—

            I used two lenses for these photos.

            The first one is a 178mm/1.9 Kaylee Bloomed Projection Lens. The front element is 94mm in diameter. I believe it was designed to project from 70mm movie film. Someone has written the label “Cinemascope #2” on the side. I assume whoever wrote that knew what they were doing. When I bid on the auction, I was hoping it would be an anamorphic lens. It isn’t, but it is still a very special lens that I’m trying to make use of. Originally I built an adapter to fit my 5d mark1, which works very well, but the full frame sensor crops out a lot of the original image circle… and most of the swirly bokeh.

            So the scanner back idea lets me capture the entire image circle for the first time. Admittedly it’s in black and white and, if I crop to a 3:2 frame, 1924x1297px. I’m looking into using a diverging lens to magnify the image circle.

            The other lens is some kind of industrial lens that I don’t know anything about. I call it Big Red. I measured the focal length at about 200mm, and the image circle is massive. It basically covers the entire A4 scanner. It has a built in green pass filter that reflects red light back out thru the front of the lens which makes me suspect that it’s an interference filter, not an absorption filter.

            —=== About photos ===—

            2024.06.15 My first actual photo that wasn’t of a ceiling light or a ruler, was taken using the 178mm. I didn’t put a lot of thought into it, I was pretty much just testing the waters to see what kind of result I could get. I hadn’t even cleaned the scanner glass yet.

            I wasn’t deliberately trying to capture motion, it just happened to be that the tree was swaying, and the power line was bouncing up and down in the breeze. If you look closely at the left of the frame, you can also make out two power poles on the skyline.

            It was a bright sunny day, and my vintage light meter read 13ev with the shutter closed, which is nearly off the scale, so I had to place a stack of things on the front of the lens to reduce the amount of light enough that I didn’t get a blown out image. After some experimentation, I ended up with: an ND400 filter, and an adapter with a manual aperture set to about 14mm diameter… I’m probably going to have to buy some more ND filters if I want capture swirly bokeh, or be very selective with lighting conditions.

            I used a random black cloth as a light shield. It’s thin and light, so it doesn’t put a lot of stress on the equipment, it works in low light situations, but in the bright sunlight, I had to stack sheets of cardboard in front of it.

            Finally I cropped the image, rotated it, and since it was backwards, corrected it by flipping. And added the text.

            2024.07.03 I took the camera to garden with the intention of doing some portraits. But it took so long to set up and adjust that I only managed to get photos of the garden, and the tower on Mt Kaukau. It’s much harder to work outside in the cold with the wind blowing the cloth, and it took so much concentration to see the laptop screen that I took all the photos at 50dpi, and forgot to set it back to 600dpi.

            I have a fresnel lens that has a focal length of about 400mm, which I placed on the glass behind the main lens. It wasn’t as successful as I’d hoped. It does dramatically increase the area of the image that I can scan, but it’s still heavily vignetted in the corners. Also, the centers of the two lenses aren’t aligned. I intend to move the main lens out over the center of the scanner.

            • Leavingoldhabits@lemmy.worldOP
              link
              fedilink
              arrow-up
              1
              ·
              4 months ago

              Thats quite the contraption! What an epic rig, and awesome shots! Thank you so much for sharing! What do you think is the cause of the moiree-pattern in the edges of some of them?

              • hhhyperfocus@lemmy.world
                link
                fedilink
                English
                arrow-up
                2
                ·
                4 months ago

                I stumbled onto another use for my contraption. I was invited to a life drawing class, and I’m terrible at drawing, so I replaced the scanner with just a sheet of blank paper, and I drew around the image that was formed on the paper.

                The scale is limited by the lens I was using. These two are about A5, but I could have drawn them larger if I was sitting closer, or using a longer lens.

                Lighting was an important aspect. The room was dark, and the model was under stage lights, and I was working under the hood.

                I’ve always wanted to try a Camera Lucida, but it’s difficult to justify buying the prism. Maybe I’ll try some kind of teleprompter type setup next time.

                • Leavingoldhabits@lemmy.worldOP
                  link
                  fedilink
                  arrow-up
                  2
                  ·
                  4 months ago

                  That’s pretty clever. You’re walking in the footsteps of the Dutch masters, using projection in this way. I really like the drawings, and congratulations on finding more uses for your device!

      • hhhyperfocus@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        11 days ago

        @Leavingoldhabits Hi again, can I ask you some technical questions? I’m struggling modify my scanner. I’ve removed the clips holding the PCB, and I even made a test scan in that state, and it still worked. Then I spent hours milling out the pinhole array. But when I assembled it again, I get weird scans.

        I have modified two different scanners. LiDe 110 - I get a tall narrow PNG file with some digital noise. I assumed I damaged the sensor, or a ribbon cable or something, so I shelved it, and looked for another scanner.

        N650U - I took more care modifying this one. I get a full width PNG file, but it has a narrow strip of white on one side, and black everywhere else. I wonder if it is related to the initial calibration that it does before scanning. I left the LED in tact, but I removed the prism, so maybe it’s lighting up just that one end of the calibration strip?

        Did you have any calibration problems? Have you encountered anything like this? Do you have any advice?

        Thanks

        • Leavingoldhabits@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          ·
          10 days ago

          Hi!

          I’ve only ever managed to get the lide30 to play nice. I have destroyed one 110 and two 220-scanners in my efforts to build a more versatile rig.

          What happens if you drop the prism back in?

          I’ve also speculated about there being som calibration and automatic gain control going on in these newer models. I believe it could be used to normalize the values coming off of the individual sensor segments.

          On my latest attempt at a 220 scanner, I actually built a small dimmable LED circuit that I attached externally to try and influence the calibration I thought was happening, but there was a disappointing lack of results. Come to think of it, I still have that rig laying around somewhere, and the experiment may have been flawed, I’ll have a look next time I’m at my workshop. I’ll let you know what I find.

          I know that rig is at least functional, as objects placed directly onto the glass renders crude shadows on the scans.

          That’s the long answer, the short answer is no, I don’t have any tips, maybe aside from working on fooling the possible calibration somehow.

          • hhhyperfocus@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            8 days ago

            I managed to change the image by just shining a torch into it during the calibration and the scan. This is exciting, I might be making progress :-)

              • hhhyperfocus@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                2 days ago

                So, when I say “change the image”, I mean the torch does affect the calibration, in the sense that I get different patterns of stripes based on the position of the torch, but it’s still just outputting stripes.

                Here are two scans I made by waving the torch around randomly during the calibration, then resting the torch on the glass.

                For some reason each pixel is just outputing the same brightness for the whole duration of the scan, except for that black spot where the torch is, which is weird.

                • hhhyperfocus@lemmy.world
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  2 days ago

                  So, I re-installed the prism, luckily it just slots back in. I’m not sure if it helped at all, I still get the much the same result most of the time.

                  I did manage to get this result. It’s black at the top because the lid was closed. I opened the scanner half way thru, and the scan turned white. Then I waved the torch over the sensor and got a definite zigzag. And there’s a hint of grey in the middle, which is encouraging.

                  So, the sensor is still working, it’s responding to light, just not in a usable way.