• 1 Post
  • 10 Comments
Joined 1 year ago
cake
Cake day: August 10th, 2023

help-circle

  • I can second this, I use aconfmgr and love it. Especially useful to manage multiple computers (desktop, laptop, old computer doing other things etc).

    Though I’m currently planning to rewrite it since it doesn’t seem maintained any more, and I want a multi-distro solution (because I also want to use it on my Pis where I run Raspbians). The rewrite will be in Rust, and I’m currently deciding on what configuration language to use. I’m leaning towards rhai (because it seems easy to integrate from the rust side, and I’m not getting too angry at the language when reading the docs for it). Oh and one component for it is already written and published: https://github.com/VorpalBlade/paketkoll is a fast rust replacement for paccheck (that is used internally by aconfmgr to find files that differ).


  • I went ahead and implemented support for filtering packages (just made a new release: v0.1.3).

    I am of course still faster. Here are two examples that show a small package (where it doesn’t really matter that much) and a huge package (where it makes a massive difference). Excuse the strange paths, this is straight from the development tree.

    Lets check on pacman itself, and lets include config files too (not sure if pacman has that option even?). Config files or not doesn’t make a measurable difference though:

    $ hyperfine -i -N --warmup 1 "./target/release/paketkoll --config-files=include pacman" "pacman -Qkk pacman"
    Benchmark 1: ./target/release/paketkoll --config-files=include pacman
      Time (mean ± σ):      14.0 ms ±   0.2 ms    [User: 21.1 ms, System: 19.0 ms]
      Range (min … max):    13.4 ms …  14.5 ms    216 runs
     
      Warning: Ignoring non-zero exit code.
     
    Benchmark 2: pacman -Qkk pacman
      Time (mean ± σ):      20.2 ms ±   0.2 ms    [User: 11.2 ms, System: 8.8 ms]
      Range (min … max):    19.9 ms …  21.1 ms    147 runs
     
    Summary
      ./target/release/paketkoll --config-files=include pacman ran
        1.44 ± 0.02 times faster than pacman -Qkk pacman
    

    Lets check on davici-resolve as well. Which is massive (5.89 GB):

    $ hyperfine -i -N --warmup 1 "./target/release/paketkoll --config-files=include pacman davinci-resolve" "pacman -Qkk pacman davinci-resolve"
    Benchmark 1: ./target/release/paketkoll --config-files=include pacman davinci-resolve
      Time (mean ± σ):     770.8 ms ±   4.3 ms    [User: 2891.2 ms, System: 641.5 ms]
      Range (min … max):   765.8 ms … 778.7 ms    10 runs
     
      Warning: Ignoring non-zero exit code.
     
    Benchmark 2: pacman -Qkk pacman davinci-resolve
      Time (mean ± σ):     10.589 s ±  0.018 s    [User: 9.371 s, System: 1.207 s]
      Range (min … max):   10.550 s … 10.620 s    10 runs
     
      Warning: Ignoring non-zero exit code.
     
    Summary
      ./target/release/paketkoll --config-files=include pacman davinci-resolve ran
       13.74 ± 0.08 times faster than pacman -Qkk pacman davinci-resolve
    

    What about a some midsized packages (vtk 359 MB, linux 131 MB)?

    $ hyperfine -i -N --warmup 1 "./target/release/paketkoll vtk" "pacman -Qkk vtk"
    Benchmark 1: ./target/release/paketkoll vtk
      Time (mean ± σ):      46.4 ms ±   0.6 ms    [User: 204.9 ms, System: 93.4 ms]
      Range (min … max):    45.7 ms …  48.8 ms    65 runs
     
    Benchmark 2: pacman -Qkk vtk
      Time (mean ± σ):     702.7 ms ±   4.4 ms    [User: 590.0 ms, System: 109.9 ms]
      Range (min … max):   698.6 ms … 710.6 ms    10 runs
     
    Summary
      ./target/release/paketkoll vtk ran
       15.15 ± 0.23 times faster than pacman -Qkk vtk
    
    $ hyperfine -i -N --warmup 1 "./target/release/paketkoll linux" "pacman -Qkk linux"
    Benchmark 1: ./target/release/paketkoll linux
      Time (mean ± σ):      34.9 ms ±   0.3 ms    [User: 95.0 ms, System: 78.2 ms]
      Range (min … max):    34.2 ms …  36.4 ms    84 runs
     
    Benchmark 2: pacman -Qkk linux
      Time (mean ± σ):     313.9 ms ±   0.4 ms    [User: 233.6 ms, System: 79.8 ms]
      Range (min … max):   313.4 ms … 314.5 ms    10 runs
     
    Summary
      ./target/release/paketkoll linux ran
        9.00 ± 0.09 times faster than pacman -Qkk linux
    

    For small sizes where neither tool performs much work, the majority is spent on fixed overheads that both tools have (loading the binary, setting up glibc internals, parsing the command line arguments, etc). For medium sizes paketkoll pulls ahead quite rapidly. And for large sizes pacman is painfully slow.

    Just for laughs I decided to check an empty meta-package (base, 0 bytes). Here pacman actually beats paketkoll, slightly. Not a useful scenario, but for full transparency I should include it:

    $ hyperfine -i -N --warmup 1 "./target/release/paketkoll base" "pacman -Qkk base"
    Benchmark 1: ./target/release/paketkoll base
      Time (mean ± σ):      13.3 ms ±   0.2 ms    [User: 15.3 ms, System: 18.8 ms]
      Range (min … max):    12.8 ms …  14.1 ms    218 runs
     
    Benchmark 2: pacman -Qkk base
      Time (mean ± σ):       8.8 ms ±   0.2 ms    [User: 2.8 ms, System: 5.8 ms]
      Range (min … max):     8.4 ms …  10.0 ms    327 runs
     
    Summary
      pacman -Qkk base ran
        1.52 ± 0.05 times faster than ./target/release/paketkoll base
    

    I always start a threadpool regardless of if I have work to do (and changing that would slow the case I actually care about). That is the most likely cause of this slightly larger fixed overhead.



  • I have only implemented for checking all packages at the current point in time (as that is what I need later on). It could be possible to add support for checking a single package.

    Thank you for reminding me of pacman -Qkk though, I had forgotten it existed.

    I just did a test of pacman -Qk and pacman -Qkk (with no package, so checking all of them) and paketkoll is much faster. Based on the man page:

    • pacman -Qk only checks file exists. I don’t have that option, I always check file properties at least, but have the option to skip checking the file hash if the mtime and size matches (paketkoll --trust-mtime). Even though I check more in this scenario I’m still about 4x faster.
    • pacman -Qkk checks checksum as well (similar to plain paketkoll). It is unclear to me if pacman will check the checksum if the mtime and size matches.

    I can report that paketkoll handily beats pacman in both scenarios (pacman -Qk is slower than paketkoll --trust-mtime, and pacman -Qkk is much slower than plain paketkoll). Below are the output of using the hyperfine benchmarking tool:

    $ hyperfine -i -N --warmup=1 "paketkoll --trust-mtime" "paketkoll" "pacman -Qk" "pacman -Qkk"
    Benchmark 1: paketkoll --trust-mtime
      Time (mean ± σ):     246.4 ms ±   7.5 ms    [User: 1223.3 ms, System: 1247.7 ms]
      Range (min … max):   238.2 ms … 261.7 ms    11 runs
     
      Warning: Ignoring non-zero exit code.
     
    Benchmark 2: paketkoll
      Time (mean ± σ):      5.312 s ±  0.387 s    [User: 17.321 s, System: 13.461 s]
      Range (min … max):    4.907 s …  6.058 s    10 runs
     
      Warning: Ignoring non-zero exit code.
     
    Benchmark 3: pacman -Qk
      Time (mean ± σ):     976.7 ms ±   5.0 ms    [User: 101.9 ms, System: 873.5 ms]
      Range (min … max):   970.3 ms … 984.6 ms    10 runs
     
    Benchmark 4: pacman -Qkk
      Time (mean ± σ):     86.467 s ±  0.160 s    [User: 53.327 s, System: 16.404 s]
      Range (min … max):   86.315 s … 86.819 s    10 runs
     
      Warning: Ignoring non-zero exit code.
    

    It appears that pacman -Qkk is much slower than paccheck --file-properties --sha256sum even. I don’t know how that is possible!

    The above benchmarks were executed on an AMD Ryzen 5600X with 32 GB RAM and an Gen3 NVME SSD. pacman -Syu executed as of yesterday most recently. Disk cache was hot in between runs for all the tools, that would make the first run a bit slower for all the tools (but not to a large extent on a SSD, I can imagine it would dominate on a mechanical HDD though)

    In conclusion:

    • When checking just file properties paketkoll is 3.96 times faster than pacman checking just if the files exist
    • When checking checksums paketkoll is 16.3 times faster than pacman checking file properties. This is impressive on a 6 core/12 thread CPU. pacman must be doing something exceedingly stupid here (might be worth looking into, perhaps it is checking both sha256sum and md5sum, which is totally unneeded). Compared to paccheck I see a 7x speedup in that scenario which is more in line with what I would expect.



  • Saying “it’s a graph of commits” makes no sense to a layperson.

    Sure, but git is aimed at programmers. Who should have learned graph theory in university. It was past of the very first course I had as an undergraduate many years ago.

    Git is definitely hard though for almost all the reasons in the article, perhaps other reasons too. But not understanding what a DAG is shouldn’t be one of them, for the intended target audience.


  • Vorpal@programming.devtoProgramming@programming.devLet's talk about Zig
    link
    fedilink
    English
    arrow-up
    20
    arrow-down
    1
    ·
    1 year ago

    I really don’t see what niche it is trying to fill that isn’t already occupied.

    Rust is as successful as it is because it found a previously unoccupied niche: safe systems programming without garbage collector and with high level abstractions that (mostly) optimise away.

    I don’t think “better C” is a big enough niche to be of interest to enough people for it to gain a critical mass. I certainly have very little interest in it myself.